The galvanised floor grating covers plant floors, pits and equipment-access openings with a zinc-coated steel grid. The load runs through the bearing bars to the supporting members. Cross bars maintain the spacing and keep the floor section together during handling. Open spaces admit drainage and ventilation through the deck. Edge banding finishes the separate panels, including pieces cut around channels or machinery. The referenced bar example provides a starting point for discussing the section; its suitability still depends on the actual span and loading. A floor layout identifies where each panel sits and which direction its bearing bars must run.
Product Parameters
|
Item |
Provided specification |
|
Referenced standard grating |
YB/4001.1-2019 |
|
Referenced flat bar |
32mm high × 5mm thick |
|
Referenced mesh length |
100mm |
|
Available bearing-bar spacing |
30mm / 40mm / 60mm |
|
Surface treatment |
Hot-dip galvanized |
Main Applications
The galvanised floor grating covers supported workshop floors and equipment-access areas.
01
Removable sections can expose service pits for maintenance.
02
Municipal and water-treatment platforms can keep liquid moving below the working surface.
03
Floor sections can be divided around equipment feet, structural beams or channel frames. Each removable piece retains a defined position on the support layout.
04
Floor layouts may contain repeated rectangular bays together with smaller closure pieces. Keeping their bar direction coordinated with the supports gives each section a defined bearing position.
05
Why choose us
For galvanised floor grating, Hebei Shunbo combines technical drawing review with welding and panel finishing. Our team can coordinate bearing direction, joint positions and cut-outs before repeated sections are fabricated. Project-shaped pieces and standard rectangles can stay within the same production package. Panel identification and batch preparation help buyers relate each finished section to its position in the floor opening.
Please show unsupported edges on the layout as well as the overall opening; those details affect how individual floor sections are prepared.
FAQ
Q: Are separate drainage holes normally needed?
A: No. The open grid already provides passages through the floor.
Q: Can shaped floor sections be supplied?
A: Yes. Outside dimensions and cut-outs can follow the approved layout.
Q: Does the example bar size suit every span?
A: No. Selection requires the actual floor load and support arrangement.
Hot Tags: galvanised floor grating, China galvanised floor grating manufacturers, suppliers, factory
